Note: If you select an assigned One Touch key, you have the option of deleting, modifying or retaining the information stored with the number. Various functions of the WorkCentre are available by selecting menu items with the menu screen displayed on the Control Panel. Using the Numeric Keypad, enter the group number you want to use to send the document, then press Enter. To set additional Department codes, repeat steps 6 through 8. useful reference
WorkCentre Pro 665/685/765/16 Introduction Polling - Chapter 7 Describes the Polling functions and instructs how to perform each function. The resulting screen message for each step appears next to the series of keys pressed. Enter the Speed Dial number you want to modify, then press Enter. Finding Information in the System Administrator s Guide (SAG) The System Administrator s Guide contains the following sections: Table of Contents Use the Table of Contents to find topics easily.
Yes 2. Using the Numeric Keypad, enter the 5-digit Department Code to assign to this Department, then press Enter. All Rights Reserved. The available length options are: 1 M: Allows document sizes up to 1 Meter in length (39.4 inches).
Transmitting Documents - Chapter 5 Describes the Transmit functions and instructs how to perform each function. Set the LDAP server address on the machine to match theaddress on the LDAP server SSL certificate. B-23 Cleaning the Charger Wire and the Laser Beam Window... Version 0 Basic User s Guide DCP-J420DW Version 0 UK If you must contact Customer Service Please complete this information for future reference: Model Number: DCP-J420DW Serial Number: Date of Purchase:
More information Version 1.0 09/10. Modify 3. If needed, refer to Setting the Department Codes procedure. To send a document to a programmed group: 1.
Networkproperly. related features do not work. PCL disabledPCL board is out of order.Confirm PCL board is PCL printing does not work.installed properly. Scanner quality lowScanning illumination (LED)Confirm LED block and area is broken or scannerreplace it B-20 Cleaning the Document Scanner... Using the Keyboard and Numeric Keypad, enter the name (max. 20 characters) you want to assign to this One Touch number, then press Enter. Go to Step 18.
To add an additional option, go to step 8. WorkCentre Pro 665/685/765/42 Programming the Machine Pre-setting One Touch Numbers Fifty One-Touch Keys can be programmed to dial a single telephone number, a Speed Dial number or a Group of numbers. Press Phonebook to print the desired report. Directly enter thereduction/enlargement ratio, or change the paper size.003-981Stapling mixed size documents is available only for documents with the samewidth.
name (20 max): Note: Department code 01 is reserved for the Master Code. see here Enter When the currently highlighted menu has sub-items, press the Enter key to display the screen of sub-items. The security code does not match.Check the security code and retry the operation.42 The Free Memory is zero causing the communication to stop.Recover sufficient memor y by completing reserved job, then Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software
number: 04 Dept. A-8 Appendix B Maintaining the Product... Each group can be assigned to a One Touch dialing key. this page Outside 3.
Maximum of 20 characters for each group. An SSL client certificatecould not be acquired. This feature sends a document to a compatible remote fax machine and requests that machine to forward the document to a network user or to a ITU-T mailbox.
D-11 Canadian Certification... number: 02 Dept. To select Send later, press, and go to step 8. number: 04 SALES After 2 seconds Set dept.
To select Confirm report, press, then go to step 11. If the document misfed, resend the document.33 Polling Error. Any ideas? Get More Info Filter By: 3501 mvsforums km5050 6203 vsam kthurst 5vlltg list canon 3502 m401 civen c4200 3602 kodak easyshare 19 questions posted Ask a Question Usually answered in minutes!
On 2. The slower speeds are used for sending to a number with questionable line conditions. Delete 2. You may NOT copy or distribute the content that appears on this site without written permission from Fixya Ltd. © 2005-2015, Fixya, Ltd.
Cancel the staple feature or reset the documents with the same width.005-210005-275005-280005-283005-284005-285005-286 An error occurred in the document feeder. Group dial 4. After all the documents are fed,the number of documents that have been scanned is displayed.You will be prompted to confirm that the number of pagesscanned are correct. To select Send later, press, and go to step 9.
To select Fax speed, press, then go to step 14. To add a password to the sub address, press to select PWD; or to exit this option, go to step 20. if LED light comes on properly, clean the glass and shading plate. WorkCentre Pro 665/685/765/78516-3 TroubleshootingError MessageProbable CauseCorrective Action Phonebook dataPhonebook information wasReprogram the dial data fromwas lostlostthe control panel or Control Centre. Comm. Ensure the tray is closed. 11A Paper Jam occurred.Open the Top Cover, and clear the copy paper jam.
To send a document to a sub address location, press select SUB. To exit without changing this Dept. To delete the One Touch number, press. Prev123456789Next » Not finding what you are looking for?