Home > Xbox 360 > Xbox 0001 Error Fix

Xbox 0001 Error Fix


Re: Anyone here know how to fix RROD error code 0001? « Reply #9 on: June 21, 2011, 05:08:01 PM » Quote from: crazy-modder on June 21, 2011, 05:03:07 PMlol i Observing a scrap board revision "#"-007 revealed that this regulator and corresponding components had been re-engineered out. Release the eject button and press it again. This error is usually a result of a failure code associated with the DVD drive. More about the author

no power to the fans, no 12v, no 5v, no 3.3v...nothing.there are no bridges anywhere. After the first number is displayed, release and then press “Eject” again to get the second number until all of the numbers in the code are noted. but it is a pain in the ass. « Last Edit: June 21, 2011, 02:31:54 PM by hyper999 » Logged Rodent XBOX,XBOX360,PS3,WII Administrator Around the block Posts: 2966 Post quality +75/-5 Just some food for thought...

Xbox 360 Error 0001 Fix Explained

Also damaged DVD power cable. [b]Fixes:[/b] 1) Make sure your PSU is working and replace it if it isnt 2) Scan the mainboard and make sure that there is nothing that started up fine, worked flawlessly for a couple days and then BAM I turned it on the other day and RROD. ERROR CODES AND WHAT THEY MEAN!http://www.acidmods.com/forum/index.php/topic,21654.msg163654.html#msg163654Problem: 0001 power supply problemEDIT: Could be the power supply , short in the xbox you really need to check things closely if your solder points

The short is located near one of the main supply lines, so mostly not under the chips, it might also be a blown capacitor fuse or just a bridged contact. I tested the power supply in two other consoles and got the 0001 error. Tec House Games 2,066 views 3:44 Solucionado error 0001 en Xbox360 - Duration: 1:26. Before removing any mosfets "check them first"Quote from: hyper999 on June 21, 2011, 02:30:58 PMI beg to differ...

I am not trying to start any type of fights... Error 0001 Xbox 360 MS Tech 334,886 views 6:23 Xbox 360 GPU Replacement E74 - Duration: 27:19. This feature is not available right now. DVD Drive or fans dont even rev up, and power brick stays on Orange.

To correct, re-seat the console's AV cable. Check PSU first (easiest) then try replacing the power cable to the DVD drive (the cable with white ends). To troubleshoot, restart the console. Lewis Hi, I've got my av cable connected to tv on correct input, nothing displayed, definitely right input selected, when i press the power on button, the xbox power supply flashes

Error 0001 Xbox 360

This can potentially save youa couple of hours, and maybe more often than you might think. your post made me wonder if this box is even worth fixing. Xbox 360 Error 0001 Fix Explained Just trying to say its ALOT!!! Materials needed: * Soldering Iron * Mosfets (just get some free samples from onsemi.com) Procedure: 1) Open up the Xbox 360 and pull out the motherboard. 2) You will have to

and again this was not meant as an attack or some sort of fight starter. my review here Xbox 360 Secondary Error Codes The Xbox 360 secondary error codes are designed to provide specific information regarding the errors that may occur with the console's various hardware components. Alex Harrison 2,528 views 0:26 Evolution of the Xbox Controller! - Duration: 6:23. Yes, my password is: Forgot your password?

possibly a short or cold solder joint somewhere. ComoHacer.eu 284,672 views 27:25 How to open and properly clean an Xbox 360 Fat - Duration: 36:06. Thanks. http://devstude.net/xbox-360/xbox-0001-error.php Lewis EDIT: Found out the error code is 0001.

Thanks again, have a good Christmas all! If the LED lights are no longer lit, turn the console off again, remove all cables, and reinstall the Xbox 360 hard drive. Check if the address is correct.

The error code I extracted was 0001, which is apparently a power supply problem.

Firmly reconnect all of the connections and restart it. The other involves re-Heating the chips. Or someone I can send it to?I really would hate to trash this Jtag box...being that they are getting harder and harder to find.Thanks in advance for any helpWow another post I have also heard of limited success by simply switching the AV cable from "HDTV" mode to "TV" mode. 0103 CPU Error/ CPU Overheating - see solution for error 0102 0110

Loading... Close Yeah, keep it Undo Close This video is unavailable. If this does not work, try to use a different AV cable to connect the console to the television or game display. navigate to this website FantasticBoy 9,842 views 1:13 Loading more suggestions...

So now it's just sitting there and not being played...so now I'm going to do this error code check and find out the problem!! If your console is still covered by the 3 year warranty use it because Microsoft will fix it for free! If you're unsure which is it just try all of them. The LEDs will now blink the forth number of the code.

I posted here cause I thought this community was full of intellectuals that wouldn't harass me for trying to get more info on a subject (the 0001 error code) that I Model number?I would really appreciate that infoThanks guys Logged Print Pages: [1] Go Up « previous next » Acidmods.com » Console Modding------ ( Here you can talk about your favorite Consoles Also damaged DVD power cable. You wont be able to remove a mosfet with a regular soldering iron.

However, there is a faint buzzing sound somewhere on the board. You can find it under the memory stick slot. Before removing any mosfets "check them first" Logged hyper999 Acidmods Alumni Millennium Poster Posts: 1158 Post quality +544/-3 Research and Development Re: Anyone here know how to fix RROD error code I checked all over the motherboard and I didnt find anything wrong.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.Username Changing provided by Username Change (Free) - vBulletin Mods & Addons Copyright