Home > Socket Error > Wsaetimedout Error

Wsaetimedout Error

Contents

Note: this error may also result if you are trying to send a multicast packet and the default gateway does not support multicast (check your interface configuration). You cannot use more than one WinSock implementation simultaneously. Berkeley description: Too many open files. the byte-order functions, htonl(), htons(), ntohl and ntohl(), cannot fail.

WSAEPROVIDERFAILEDINIT 10106 Service provider failed to initialize. We've just sent you an email to . Additional functions: a generic description of the type of functions that can return this error, which may include functions other than those listed by the WinSock specification. Note that this error is returned by the operating system, so the error number may change in future releases of Windows.

Socket Error 10054

If there is a firewall, make sure that incoming connections to port 1666 are permitted, and that all existing outbound connections are permitted (the latter is usually standard). TCP connect to public.perfoce.com:1666 failed. The only function that takes these two explicit parameters is socket().

  1. If you used a hostname, did it resolve to the correct address?
  2. Detailed description: There's at least one WinSock implementation that will occasionally fail a function and report this as the error value, even though the function succeeded.
  3. Berkeley description: Some invalid argument was supplied (for example, specifying an invalid level to the setsockopt() function).
  4. The WinSock implementation will not allow you to send after this.
  5. For WinSock, this error is equivalent to Berkeley's EHOSTUNREACH error, the catch-all error for unreachable hosts. "You can't get there from here." TCP/IP scenario: The local network system could generate this
  6. WinSock functions: See also: WSAECONNABORTED, WSAECONNRESET, WSAENETRESET, WSAETIMEDOUT WSAEHOSTUNREACH (10065) No route to host.
  7. WSA_OPERATION_ABORTED 995 Overlapped operation aborted.
  8. WSA_QOS_EFILTERCOUNT 11021 Incorrect QoS filter count.
  9. The ICMP message means that a router can't forward the IP datagram, possibly because it didn't get a response to the ARP request (which might mean the destination host is down).

The values for WSANO_DATA and WSANO_ADDRESS (11004) are duplicates, so we don't count one of them. This usually results from trying to connect to a service that is inactive on the foreign host—that is, one with no server application running. Check the destination address you are using. Socket Error 10049 You are unlikely to encounter them.

To recover the orphaned sockets, you can try closing the application and restarting it to recover the open sockets; you may have to end all WinSock applications (to force an unload What Is A Socket Error Too many links were encountered in translating a pathname. The call has been canceled. User suggestions: Did you enter a destination hostname?

User suggestions: This error indicates a shortage of resources on your system. Socket Error 10054 Connection Reset By Peer If you are using a router, verify the router is up and running (check by pinging it and then ping an address outside of the router). An application used a Windows Sockets function that directly maps to a Windows function. If you cannot ping the server, then either ICMP is being blocked or there is a network issue outside of Perforce.Verify that the server port is reachable by "telnet ".

What Is A Socket Error

Detailed descriptions: connect(): the operation is underway, but as yet incomplete. However, it is interchangeable in most cases, and all Windows Sockets functions that return one of these messages also specify WSAEAFNOSUPPORT. Socket Error 10054 Click the Type tab. Socket Error 10053 An established connection was aborted by the software in your host computer, possibly due to a data transmission time-out or protocol error.

Check whether you have a router configured in your network system (your WinSock implementation). An operation was attempted on something that is not a socket. A call to the WSALookupServiceEnd function was made while this call was still processing. Magalhaes Stefaan Pouseele Blogs Books Hardware ISA Appliances SSL Acceleration Links Message Boards Newsletter Signup RSS Feed Software Access Control Anti Virus Authentication Backup & Recovery Bandwidth Control Caching Content Security Socket Error 10061 Connection Refused

If so, then the application might have had a problem resolving the name (see suggestions at WSATRY_AGAIN for more information). WSAEHOSTDOWN 10064 Host is down. A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram was smaller than the User suggestions: Things an application user can do to diagnose the error condition further, and/or remedy it.

thanks anyway, Simon. (in reply to tshinder) Post #: 5 RE: WSAETIMEDOUT Error - 25.May2007 5:45:42 AM simonhill Posts: 21 Joined: 1.Mar.2005 From: UK Status: offline I know it's Winsock Error 10061 This error may also be returned for protocol and service queries, and means that the specified name could not be found in the relevant database. WSAEBADF (10009) Bad file descriptor.

Some of the types of things you will find under some errors are: Microsoft C description: the first few WinSock errors are carry-overs from the standard 'C' runtime library.

Developer suggestions: Assume bind() will fail with this error. SO_ACCEPTCONN, SO_DONTLINGER, SO_KEEPALIVE, SO_LINGER, SO_OOBINLINE and TCP_NODELAY are not supported on sockets of type SOCK_DGRAM. WSA_E_CANCELLED 10111 Call was canceled. Socket Error 10061 Ppsspp WSAEISCONN (10056) Socket is already connected.

WSAEMSGSIZE (10040) Message too long. WSA_QOS_TRAFFIC_CTRL_ERROR 11014 QoS traffic control error. Whether to handle it as a fatal error or non-fatal error depends on the application and the context, so it's entirely up to you to decide. It may also indicate you are not closing the applications properly.

An object with an invalid ObjectLength field was specified in the QoS provider-specific buffer. This error is returned if an incorrect protocol is explicitly requested in the socket call, or if an address of the wrong family is used for a socket, for example, in Berkeley description: A message sent on a socket was larger than the internal message buffer or some other network limit. This will verify that the destination network is functioning.

On Windows machines, go to Control Panel -> Windows Firewall, click on Advanced Settings, and then click on Inbound Rules on the sidebar. WSANO_RECOVERY 11003 This is a nonrecoverable error. Berkeley description: The attempted operation is not supported for the type of object referenced. Some invalid argument was supplied (for example, specifying an invalid level to the setsockopt function).

Why do rocket nozzles open near the end \dot not centred above \symbf of a capital letter Has Trump publicly stated during what period he believed the USA to be great? I am getting 10060 afterthe usage of 3+ hours.3+hours it works fine but afterwards it is giving 10060 error. –Ershad Nov 9 '11 at 12:53 add a comment| 1 Answer 1 Note the British spelling (with an 'S' instead of a 'Z'). Berkeley description: A component of a path name exceeded 255 (MAXNAMELEN) characters, or an entire path name exceeded 1023 (MAXPATHLEN-1) characters.

This is what occurs in Berkeley Sockets. you're trying to share a socket between tasks). User suggestions: Do you have the WinSock DLL that supports the version of the WinSock specification required by the application? WSA_QOS_EFLOWCOUNT 11023 Incorrect QoS flow count.

For example, you cannot use the ARPA Internet UDP protocol with type SOCK_STREAM. WSA_IO_INCOMPLETE 996 Overlapped I/O event object not in signaled state. For instance, if the length of an argument, which is a sockaddr structure, is smaller than the sizeof(sockaddr). Detailed description: select(): fails with WSAENOTSOCK if any socket in an fd_set is an invalid socket handle.