Home > Error Code > Wm2432hw Le Error

Wm2432hw Le Error


I had the LE code flashing for the first time after 5 years of use. Try out our unique manual viewer allowing you to interact with manuals from directly within your browser! But then I read your directions and when the repairman got here and took off the back of the machine he told me I needed a new motor! Let me ask you this...if you are crossing the railroad tracks and your eyes (your sensors) tell you that a train is coming...do you blink and squint and pinch your eyeballs

If you want to fix this problem yourself, you will probably need to take off the front panel and remove that spin basket. But each time, the fix lasts for a shorter and shorter time. Thanks !! 1) Unplug machine 2) Drain machine 3) Open machine and rotate barrel clockwise 4 times and counter-clockwise 4 times 4) Plug in, power on, and run regular cycle Kiran Dave September 2013 Great forum.

Lg Top Load Washer Le Error Code

Anything else I could check? I believe motor overheated. You should read between 5 and 15 ohms between any two wires. andrejko zilinek 31,651 views 3:39 How to Diagnose Drum Problems in a Washing Machine - Duration: 7:48.

You can change this preference below. I unplugged it for about 20 minutes, rotated the drum once, and emptied the water chamber from the tubes behind the bottom door. If the unit is less that 7 years old the stator and rotor are in parts warranty only. Le Error Code Lg Dishwasher I will try and post a video soon of how to fit the 2002a part Jon February 2015 I have a LG WD-10121FD.

I have the Lg Tromm 05 I admit i was a bit skeptic looking at some of the responses. Lg Washer Le Code Not Spinning The stator measured 7.4 ohms across any of the terminals. Household Appliances, Washing Machines (38575 other questions) Related questions - lg, washing, machine, says, le, digital, window Add a question Mend > Washing Machines
my LG washing machine says 'LE' in http://appliancejunk.com/forums/index.php?topic=1735.0 Press the START button two more times--this will enable the tub to tumble.

The motor then stops and reverses acouple of times and tries to spin again until the load is in balance. ____________________25 Years in the biz. 9 years LG authorized. Le Error Code Samsung Washer I highly doubt the sensor was ever faulty. I did have to get my wife to hold the drum from the front so that it would not spin when I tried to remove that one big bolt in the See Details Electrolux EFLS617STT 4.4 cu.

  • Charles December 2010 This site is great. :) Thanks for the info..
  • If you are washing a large load, don’t choose a gentle cycle like Delicates, Hand Wash, Perm Press or Wool/Silk.
  • It was easy to reassemble but at first I thought the item had broken.
  • Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go
  • Unplug the Hall Sensor 5.
  • Expert: Appliance Medic replied5 years ago.
  • But now I need help.
  • Ask Your Own Appliance Question Share this conversation Related Appliance Questions Question Date Submitted I HAVE A GE MODEL GFSS6KKYBSS, SERIAL # LS900028, IT HAS THE 11/2/2016 11/2/2016 centralappliance1 Where is
  • without this site, I never would have thought unplugging something would reset it.

Lg Washer Le Code Not Spinning

You can also verify the wiring to the motor by measuring between any two wires on the red motor connector with blue, red, and yellow wires. http://www.lgleerror.info/repair_lg_le_error.html Remove the old sensor and replace the new one. 6. Lg Top Load Washer Le Error Code Please HELP, anyone! :) How do I get this off? Lg Washing Machine Error Code Ie NOTE: I didn't take out any clothes.

Plug in the Hall Sensor Connector 7. Courtney July 2010 We've been plagued by this LE Error and have replaced the Hall Sensor twice on our WM2277HW. My toolkit stopped at 15mm, but my neighbor was glad to loan me his. Top 6 Reasons Top-Load Washer Won’t Spin? What Does Le Mean On Lg Washer

I picked up a new HALL Sensor from a RepairClinic.com for $21.49 (local pick-up for me, so no shipping costs) and had the washer up and running in less than 20 Have a great day! I did not drain the water. Disassembly, parts cleaning and bearing removal was approx 3 hours.

Top 6 Reasons Top-Load Washer Won’t Agitate? 6501kw2002a The friction pads fell out. It should work just fine.

The machine has been used every 2nd or 3rd day for 5 years.

Also read something about possible bad inlet valve but we will see after service shows up, I sadly hope that it fixes temporarily as I can call again for service and BTW If you are like me on west coast, might be a quicker option is to order the sensor from California parts supplier for LG (http://lge.andrewselectronics.com). Tried your 1st fix of spinning drum while unplugged. Lg Washer Error Code Another Happy Canadian January 2014 Confirming that unplugging, rotating the drum 4x to the left and 4x to the right then plugging back in worked for my LG washer.

It will then spin the drum counter clock for two full rotations. I have replaced the HAL sensor at least 6 times - I can do it in about 12 minutes now! The MOTOR HARNESS between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY is cut (open circuited).• The hall sensor is out of order/defective. After trying the "unplugging and plugging back in" trick, without any success, I tried the next popular suggestion, and that was to change the HALL Sensor.

Then measure between the blue and gray wires while slowly rotating the motor. It worked! The unit was bought in September of 2004. with all the money i've wasted on repairs that don't fix anything, i think i'm about to throw in the towel and buy a new washer (with a warranty, and NOT

Top-Load ... This is an amana front loader washer. HE detergents also hold soils and dyes in suspension in low water volumes, so they don’t re-deposit onto cleaned clothes. Anne March 2010 My LG Tromm front loading washing machine would not do nothing but flash a LE error code wm1814cw so i unplugged it for a minute or so

Thanks again for sharing! Back To Top PM Quote Reply Posted: Wed Mar 5th, 2008 01:05 am PM Quote Reply 8th Post Macguy.ca Senior Apprentice Appliantologist Joined:Sun Mar 2nd, 2008 Location:Ottawa, Ontario The hall sensor is also available by it's self. Any help would be greatly appreciated.

Thankfully I live in Michigan, and can return to repairclinic.com to return the stator and PCB I purchased earlier today. They correctly advised unplugging the machine for 30 minutes. 4 years later the LE error came on again.